Price Of Viagra In Indian Rupees

Forum Partners

Forum Partners is a global real estate investment and asset management firm. Forum is recognized for investing in and alongside public and private real estate companies, with a focus on income and capital preservation.

Our strength lies in identifying a catalyst for unlocking asset and enterprise value and tailoring an investment accordingly. Key to this approach is Forum’s core principle of focusing on downside protection while retaining upside potential.

Forum Partners Investment Management LLC is registered with the United States Securities and Exchange Commission (“SEC”) as an investment adviser under the Investment Advisers Act of 1940, as amended.

Terms of Use

This website from which you are accessing these Terms of Use (“Site”) is created and maintained by Forum Partners Investment Management LLC (referred to below as “Forum Partners,” “we,” and “us”).

In these Terms and Conditions, 'affiliated entities' means any direct or indirect parent, subsidiaries, or affiliated companies of Forum Partners.

Please read the below terms and conditions (“Terms of Use”) carefully. Your use of the Site is subject to these Terms of Use.

1. Acceptance of Terms. The Site is made available by Forum Partners subject to this Agreement. We reserve the right to update or make changes to this Agreement from time to time, which changes we may provide to you by any reasonable means, including without limitation, by posting the revised version of this Agreement on the Site. You can determine when this Agreement was last revised by referring to the “LAST UPDATED” legend at the top of this Agreement. Your access to or use of the Site following changes to this Agreement will constitute your acceptance of those changes. Any changes to this Agreement shall not apply to any dispute between you and Forum Partners arising prior to the date on which Forum Partners posted the revised version of this Agreement incorporating such changes or otherwise notified you of such changes.

BY ACCESSING OR USING THE SITE, YOU AFFIRM THAT YOU ARE OF LEGAL AGE TO ENTER INTO THIS AGREEMENT AND YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THIS AGREEMENT.

We reserve the right, at any time and from time to time, temporarily or permanently, in whole or in part, to: modify or discontinue the Site, with or without notice; charge fees in connection with the use of the Site; modify or waive any fees charged in connection with the Site; or offer opportunities to some or all users of the Site. You agree that we shall not be liable to you or to any third party for any modification, suspension or discontinuance of the Site, in whole or in part, or of any service, content, feature or product offered through the Site. Your continued access to or use of the Site after such changes will indicate your acceptance of such changes.

2. Intended use of the Site. The information on this Site is provided for informational purposes only. Nothing contained in the Site shall be used or considered as an offer or a solicitation of any offer to sell or buy securities, products or services of Forum Partners or any other issuer. Forum Partners makes no representations that securities, products or services referenced in the Site are available or appropriate for sale or use in all jurisdictions or by all investors. Your use of the Site and/or Content (as defined below) must at all times comply with all applicable laws, rules and regulations.

Certain statements and information on the Site contain certain forward-looking statements. Such forward-looking statements may include, without limitation, plans, prospects and strategies as well as beliefs and expectations concerning future performance (certain of such statements are identified by use of words such as “expect,” “anticipate,” “intend,” “plan,” “believe,” “seek,” “estimate,” and variations of such words and similar expressions). These statements are not guarantees of future performance and involve risks, uncertainties and assumptions which are difficult to predict. Actual results may vary materially from those expressed or implied by any forward-looking statements contained on the Site due to changes in economic, business, competitive, technological and/or regulatory factors, and other risks and uncertainties.

Forum Partners does not use the Site to provide investment or other advice, and no information or other materials on the Site should be interpreted as a recommendation to buy or sell any securities or to be relied upon for the purpose of making investment decisions.

3. Content we make available on the Site. Forum Partners may make available via the Site content, including (but not limited to) information and other texts, photos, pictures and other images, software, or applications (together referred to as “Content”). We, our affiliated entities and/or our licensors own all Content made available through the Site. Such Content is subject to copyright, trademark or other intellectual property rights and laws. Unless expressly stated otherwise, you may not reproduce, modify, disseminate or otherwise exploit our Content in any way or form without our prior express approval.

In addition, you acknowledge that the Site itself is protected by copyright law. All trademarks used on the Site are the property of their respective owners.

PLEASE NOTE THAT UNAUTHORIZED USE OF THE SITE OR ANY CONTENT ON THE SITE (INCLUDING WITHOUT LIMITATION ANY SOFTWARE MADE AVAILABLE THROUGH THE SITE) MAY IN PARTICULAR JURISDICTIONS RESULT IN MONETARY DAMAGES AND OTHER CIVIL AND CRIMINAL PENALTIES INCLUDING WITHOUT LIMITATION, FOR COPYRIGHT INFRINGEMENT.

4. Rules of Conduct. In using the Site, you agree to comply with the following “Rules of Conduct” as updated from time to time by us. You are prohibited from posting or transmitting, through or in connection with the Site, any (a) unlawful, threatening, defamatory, obscene, scandalous, inflammatory or profane material or any material that could constitute or encourage conduct that would be considered a criminal offense, give rise to civil liability, or otherwise violate any law; (b) virus, worm, Trojan horse, Easter egg, time bomb, spyware or other computer code, file, or program that is harmful or invasive or may or is intended to damage or hijack the operation of, or to monitor the use of, any hardware, software or equipment; or (c) unsolicited or unauthorized advertising, promotional materials, “junk mail,” “spam,” or any other form of solicitation. In addition, you will not (i) interfere with or disrupt the operation of the Site or the servers or networks used to make the Site available; or violate any requirements, procedures, policies or regulations of such networks; (ii) access or use the Site through any technology or means other than those expressly designated by us; (iii) except as expressly permitted by applicable law, modify, adapt, translate, reverse engineer, decompile or disassemble any portion of the Site; (iv) remove any copyright, trademark or other proprietary rights notice from the Site or materials originating from the Site; (v) create a database by systematically downloading and storing all or any Site content; or (vi) use any robot, spider, site search/retrieval application or other manual or automatic device to retrieve, index, “scrape,” “data mine” or in any way reproduce or circumvent the navigational structure or presentation of the Site, without our express prior written consent. Forum Partners may fully cooperate with any law enforcement authorities and/or court order requesting or directing Forum Partners to disclose the identity of anyone who has engaged in any violation of the Rules of Conduct, including (but not limited to) anyone who has posted information or materials in violation of the Rules of Conduct, and Forum Partners reserves the right to moderate (including removing) any such information or materials at any time from this Site.

5. Links. The Site may provide links to other websites and online resources. We are not responsible for and do not endorse such external sites or resources. Other sites may link to the Site with or without our authorization, and we may block any links to or from the Site. YOUR USE OF THIRD PARTY WEB SITES AND RESOURCES IS AT YOUR OWN RISK.

6. Information Submitted Through the Site. Your submission of information through the Site is governed by our Privacy Policy . You agree that all information that you provide to us is true, accurate and complete, and that you will maintain and update such information regularly.

7. Registration; User Names and Passwords. You may need to register to use all or part of the Site. You represent and warrant that all information submitted to Forum Partners in connection with such registration is complete and accurate. We may reject, or require that you change, for any reason, any user name, password or other information that you provide to us in registering. Your user name and password are for your personal use only and should be kept confidential; you (and not Forum Partners) are responsible for any use or misuse of your user name or password, and you must promptly notify us of any confidentiality breach or unauthorized use of your user name or password, or your Site account. We are not liable for any loss or damage arising from your failure to comply with any of the foregoing obligations.

8. Liability. WHILE WE ENDEAVOR TO MAINTAIN THE INFORMATION ON THIS SITE ACCURATE AND UP-TO-DATE, YOU ACKNOWLEDGE THAT THIS SITE AND ALL CONTENT, INFORMATION AND MATERIALS MADE AVAILABLE THROUGH THIS SITE ARE PROVIDED TO YOU “AS IS” WITHOUT ANY EXPRESS WARRANTIES OR REPRESENTATIONS OF ANY KIND. FORUM PARTNERS, ITS AFFILIATED ENTITIES AND THEIR RESPECTIVE LICENSORS DISCLAIM ALL STATUTORY AND IMPLIED REPRESENTATIONS, WARRANTIES, TERMS AND CONDITIONS WITH RESPECT TO THIS SITE AND ALL CONTENT, INFORMATION AND MATERIALS MADE AVAILABLE THROUGH THIS SITE, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. WE DO NOT PROMISE THAT THIS SITE, OR ANY INFORMATION, CONTENT OR MATERIALS MADE AVAILABLE THROUGH THIS SITE, WILL BE ACCURATE, RELIABLE, COMPLETE, ERROR FREE OR COMPATIBLE WITH ANY PARTICULAR HARDWARE OR SOFTWARE. WITHOUT LIMITING THE FOREGOING, FORUM PARTNERS, ITS AFFILIATED ENTITIES AND THEIR DIRECTORS, OFFICERS, EMPLOYEES, AGENTS, REPRESENTATIVES, LICENSORS AND PROVIDERS MAKE NO REPRESENTATION OR WARRANTY (A) REGARDING THE STATEMENTS, ACTS OR OMISSIONS OF ANY THIRD PARTIES; (B) THAT THIS SITE AND/OR ANY OF ITS FEATURES WILL BE AVAILABLE ON A TIMELY BASIS, OR THAT ACCESS TO THIS SITE AND/OR ANY OF ITS FEATURES WILL BE UNINTERRUPTED OR SECURE; (C) THAT DEFECTS OR ERRORS WILL BE CORRECTED; OR (D) THAT THE SITE OR THE SERVERS OR NETWORKS THROUGH WHICH THE SITE IS MADE AVAILABLE ARE SECURE OR FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS.

NEITHER FORUM PARTNERS NOR ANY OF ITS AFFILIATED ENTITIES, NOR ANY OF ITS OR THEIR AGENCIES, NOR ANY OTHER PARTY INVOLVED IN CREATING, PRODUCING, OR DELIVERING THE SITE, IS LIABLE FOR ANY DIRECT, INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR PUNITIVE DAMAGES OR LOSSES ARISING OUT OF OR IN CONNECTION WITH YOUR ACCESS TO, OR USE OF, THE SITE, ITS FEATURES OR ANY CONTENT MADE AVAILABLE THROUGH THE SITE, EVEN IF ADVISED IN ADVANCE OF SUCH DAMAGES OR LOSSES, TO THE EXTENT PERMITTED BY APPLICABLE LAW. OUR MAXIMUM LIABILITY FOR ALL DAMAGES, LOSSES AND CAUSES OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING WITHOUT LIMITATION NEGLIGENCE) OR OTHERWISE SHALL BE THE TOTAL AMOUNT PAID BY YOU TO US TO ACCESS AND USE THE SITE.

IT IS POSSIBLE THAT APPLICABLE LAW MAY NOT ALLOW FOR LIMITATIONS ON CERTAIN IMPLIED WARRANTIES OR EXCLUSIONS OR LIMITATIONS OF CERTAIN DAMAGES; SOLELY TO THE EXTENT THAT SUCH LAW APPLIES TO YOU, SOME OR ALL OF THE ABOVE DISCLAIMERS, EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU, AND YOU MAY HAVE ADDITIONAL RIGHTS.

9. Indemnity. Except to the extent prohibited under applicable law, you agree to defend, indemnify and hold harmless Forum Partners, its affiliated entities, and any other party involved in creating, producing or delivering the Site, and their respective directors, officers, employees, agents, shareholders, licensors and representatives, from and against all claims, losses, costs and expenses (including without limitation attorneys fees) arising out of (a) your use of, or activities in connection with, the Site; (b) any violation of these terms of use by you; or (c) any allegation that any Content that you make available or create through the Site, infringes or otherwise violates the copyright, trademark, trade secret, privacy or other intellectual property or other rights of any third party.

10. Termination. These Terms of Use are effective until terminated. You agree that we may terminate your access to or use of the Site or any portion thereof, at any time, if you breach these Terms of Use, or we reasonably believe that you have breached these Terms of Use, subject to any restrictions placed on our exercise of such rights under applicable law. Upon any such termination, your right to access and use the Site will immediately cease. You agree that any termination of your access to or use of the Site may be effected without prior notice to you. You further agree that neither we nor our affiliated entities will be liable to you or any third party for any termination of your access to or use of the Site. Sections 2-4, 5-11 and 13-14 shall survive any expiration or termination of these Terms of Use.

11. Filtering. Pursuant to 47 U.S.C. Section 230(d), as amended, we hereby notify you that parental control protections (such as computer hardware, software or filtering services) are commercially available that may assist you in limiting access to material that is harmful to minors. Information identifying current providers of such protections is available on the following two sites: GetNetWise (http://kids.getnetwise.org/) and OnGuard Online (http://onguardonline.gov/). Note that we do not endorse, support or approve any of the products or services listed at such sites.

12. Contact. If you have a question or complaint regarding the Site or these Terms of Use, please send an e-mail to mark.pearson@forumpartners.com. You may also contact us by writing to Forum Partners, 1st Floor, 16 Berkeley Street, London, W1J 8DZ, or by calling us at +44 207 290 3024. Please note that e-mail communications will not necessarily be secure; accordingly, you should not include sensitive information in your e-mail correspondence with us. In addition, California residents may reach the Complaint Assistance Unit of the Division of Consumer Services of the California Department of Consumer Affairs by mail at 1625 North Market Blvd. Sacramento, CA 95834, or by telephone at (916) 445–1254 or (800) 952–5210.

13. Governing Law. These Terms of Use shall be governed by and construed in accordance with the laws of England and Wales, without regard to its choice of law provisions. You agree to the exclusive jurisdiction by the courts located in London, England, and you hereby waive any jurisdictional, venue or inconvenient forum objections to such courts. The UN Convention on Contracts for the International Sale of Goods will not apply to these Terms of Use.

14. Miscellaneous. If any provision of these Terms of Use shall be deemed to be unlawful, void or for any reason unenforceable, then that provision shall be deemed severable from these terms and shall not affect the validity and enforceability of any remaining provisions. These Terms of Use do not, and shall not be construed to, create any partnership, joint venture, employer-employee, or agency relationship between you and us. You may not assign, transfer or sublicense any or all of your rights or obligations under these Terms of Use without our express prior written consent. No waiver by either party of any breach or default hereunder will be deemed to be a waiver of any preceding or subsequent breach or default. Any heading, caption or section title contained herein is inserted only as a matter of convenience, and in no way defines or explains any section or provision hereof. These Terms of Use, together with all agreements and statements referred to herein and incorporated herein by reference, is the entire agreement between you and us relating to the subject matter hereof and, except as otherwise provided herein, supersedes any and all prior or contemporaneous written or oral agreements or understandings between you and us relating to such subject matter. Notices to you may be made by posting a notice (or a link to a notice) to the Site, by email, or by regular mail, in our discretion. Without limitation, you agree that a printed version of these Terms of Use and of any notice given in electronic form shall be admissible in judicial or administrative proceedings based upon or relating to these Terms of Use to the same extent and subject to the same conditions as other business documents and records originally generated and maintained in printed form. We will not be responsible for failures to fulfill any obligations due to causes beyond our control. You agree that our licensors who make their Content available to us in connection with the Site are third-party beneficiaries under these Terms of Use with the right to enforce the provisions of this Agreement that directly concern their content. Notwithstanding the immediately preceding sentence, our right to enter into, rescind or terminate any variation, waiver or settlement under these Terms of Use is not subject to the consent of any third party.

You may print, download or otherwise retain a copy of these Terms of Use (and of any revised version) for your records.

Site ©2013 Forum Partners Investment Management LLC unless otherwise noted. All rights reserved.

Last updated on 29 July 2013


‘Bura’
(Lal Bahadur Bishwakarma),the Royal Kami

T he Royal Kami. the old master kami who makes khukuris for the king of Nepal and his top ranked cohorts came to shop 2 and made me a “royal” khukuri. He was puttering around shop 2 for 15 days. I asked his name and Kami Sherpa said, “I don’t know. His nickname is Bura (meaning “old man”) and that’s what we call him.

I guess Bura is five-foot-two or three and weighs maybe 115 pounds but he can swing a mean hammer and he knows how and where to hit hot steel. He’s good. He knows more and thinks better than anybody in the shop which I suppose is why he’s foreman. It may surprise some to learn that he has three wives and children by all of them. Maybe that’s why he shows up for work everyday. But come to think of it if I had three wives I’d not be able to show up for work — ever.

Bura is about 45 and has 35 years experience as a kami. He lives in Swayambu and commutes to work via bus — about a one hour journey each way. Lucky for Bura, I guess, he has a very short walk to the bus. Same from BirGorkha. Bus stop is only five or ten minute walk. He gets to work about six AM and leaves about 6 PM. He is very steady and a no nonsense guy. He comes to work to make khukuris, not to smoke cigarettes and drink tea. He is not our top producer but he makes the best khukuris in BirGorkha and perhaps in Nepal.

Bura smokes as do most of the kamis. I bought all the shop people a pack of Khukuri cigarettes several times each week while I was there.

Got my first taste of Bura, the Taskmaster, my first five minutes at BirGorkha. As soon as Gelbu and I walked into the shop Bura raked Gelbu over the coals because Gelbu had not alerted the shop to my upcoming visit. What Bura told Gelbu was essentially this and you’ll have to forgive the language but this is the way he talks as do most kamis — gets the point across: You rotten little ba*tard. Here’s the man who sells our khukuris and sends us our money and you brought him here without allowing us to give him the proper greeting he deserves. Get out of here you little a***hole and bring Bill Sahib back tomorrow and we will have the shop and ourselves prepared. Because you have no manners you bring disgrace on all of us.

You must remember that Gelbu is the boss, too, so you can imagine how Bura talks to his helpers.

Here is Bura (Lal Bahadur Bishwakarma), his wife, kids and mother-in-law at their new deera, second floor of BirGorkha. The furnishings are sparse but okay by Nepal standards and the free rent Bura and his family enjoys is an unheard of perk in Nepal — only at BirGorkha could this happen:

Bura was sort of the leader of the prayer movement when I was in the hospital and for that I extend great thanks to him and all the others who followed suit.

T he day I left I appointed the Royal Kami to the position of shop foreman. He is the best kami we have and is an old man who knows much. Further, he is a good man and will be able to offer a lot of help and good advice to my son, Gelbu, who still has a lot to learn. I instructed Gelbu to listen to him closely and follow his good advice.

Last night when we spoke with Gelbu I found out his name. It is Lal Bahadur Bishwakarma but everybody will still call him “Bura”, including me, and he is the nephew of Ganga Ram Bishwakarma who is in charge of making the Ganga Ram specials.

Being the Royal Kami has honour but the work is far from steady. The king and his top aides only need a few khukuris. Now Bura will have steady work and if the king wants a khukuri made we will simply do it in shop 2. Perhaps we have accidentally become the Royal Arun (“shop”)!
–KAMI SHERPA

The Royal Kami at work
(Bura making a handle for a Banspati ):

After recovering in hospital from a blood clot in the brain, Bura is back making khukuris. He may not be able to swing the hammer but so what. In a lot of shops here in the US the hammer swinging is done by a machine. He’s using helpers to do the heavy work but he’s overseeing everything. I just got in a couple of M43s and some other stuff with his mark and it’s Bura work for sure.

The secret to success is knowing when to pull the steel from the forge and telling the helper where to hit. Then knowing when to pull the knife from the forge and how to pour the water. Bura did not like to use helpers but I guess when you have no choice you do what you have to do.

I am not at all surprised. I knew Bura would not give up and would find a way.

It’s good news, really — two pluses. Bura is producing and this is going to make him feel good and his helpers will learn more from him than they would working with any other kami — but knowing what a taskmaster Bura is, the helpers will pay the price for their education: ‘Not like that, you idiot. ‘
–B. Martino, 21-Oct-2002

Message from Bura:
To Joi (Bill Martino — ‘son in law’) and Banji (Yangdu — ‘niece’) and all the fine HI customers who sent money for me:
��
If you had not done this thing I think I would be dead so your great gift has given me more life than perhaps I deserve and for this there is not enough thanks in the world. I remember you all in my daily puja and when we do Bishwakarma puja we pray for all of you. This is the best I can do to repay you. Blessings to all of you and a special thanks from me and my family from the bottom of our hearts.
–Royal Kami Lal Bahadur Bishwakarma (‘Bura’), August 2002
� �
Gelbu, the most educated and medically knowledgeable in the family, says he is almost certain Bura suffered a stroke — for whatever that’s worth. Bura went for checkup a day or two back and doc says he’s doing fine but is facing meds for the rest of his life. Med clots meds, I’m sure. I think Bura is going to be hard to kill.

Another thing I learned is that, after Bura’s release from Bir Hospital, Pala [Kami Sherpa] took him to his [Kami Sherpa’s] home and cared for him until he was sure Bura was OK. Bura lives an hour by bus from Bir Hospital — no phone and no transportation. Pala lives 10 minutes away from the hospital and has tranportation available. Bura’s wife is illiterate and has no idea about health care. She didn’t complain and Pala did what was right and needed doing and my hat’s off to him. (I had to chuckle when I learned that Pala had taken Bura home to keep an eye on him when he was discharged from the hospital. Pala lives next door to a Brahmin family and I’m sure they were aghast at the notion of bringing an ‘untouchable’ into the household to live, sleep and eat.)�

All in all not such bad news.

Thanks again to all who helped from Pala, Bura, Bura’s family, and me.

Kesar Lal Bishwakarma
K esar was the first kami Pala (=Kami Sherpa) hired. He’d heard Pala was opening a new “high tech” shop and was looking for top kamis and would pay top wages for same.

He showed up, made a couple of example khukuris and Pala put him on contract. That’s how all the kamis are paid. No salary. They are independent contractors and paid for the work produced. Bonus for exceptional work.

Kesar almost never misses work and does very good work. He’s a good steady producer. Additionally, he’s a nice pleasant guy and easy to get along with.

Now, here’s one (or perhaps many depending on your point of view) of the reasons Kesar shows up for work and produces on a very steady basis.

At his small home he has living with him TWO wives, TWO mothers in law, mother, maybe ten kids and a couple of nephews, nieces, and may a cousin or two — 20 people in all. And it’s his earnings at BirGorkha plus the few vegetables they can grow and the dozen or so chickens they keep that feed them all. He’s GOT to be old reliable or those 20 folks will go hungry.

I know it looks crazy to us but ‘Nepal ho’. More power to him — I guess.

–Bill Martino, 1-March-2002

Sanu Bishwakarma
Sanu has been with us for awhile. Gelbu recruited him on an early recruiting journey to various villages. The story goes like this.

Gelbu ran across Sanu is some small village — don’t know the name, and Sanu was having a hard time of it. Unlike many kamis he owned no land and was living in a small rented mud hut and had his shop located outside in the dirt. He is perhaps 35 or 40, married with a couple of kids. He had only a couple of khukuris in stock and was out of steel and other supplies. Gelbu looked at the khukuris and they were pretty good so he bought them.

Sanu complained that he had not had enough work to meet expenses and he had been forced to borrow 10,000 rupia just to stay alive. He did not have enough money left to buy food or steel so he was mightily pleased to receive payment for the last two khukuris he had in stock. I think these two khukuris came in our first shipment of village models so somebody out there has them but I don’t know who.

During their conversation Sanu discovered that we were just getting shop 2 on the air and asked for a job. Gelbu told him to come along and return with him and speak with Pala. Sanu readily agreed.

Upon his arrival in Kathmandu Sanu told Pala his story and asked for work. To his great credit Pala gave Sanu 15,000 rupees and told Sanu to return to his village, pay his debts, load up his wife and kids and return to Kathmandu for work.

And to the great credit of Sanu he did exactly as he was told. He has worked very hard and just before Pala left for the US Sanu repaid the last of the 15,000 rupia Pala had loaned him.

There are three very important considerations here.

The first is the great trust and generosity shown by Pala. One of the “benefits” I mentioned offered by shop 2 that are unheard of in other shops. Remembering that the per capita income in Nepal is about US$150 per year the amount Pala loaned Sanu was more than US$200 or well above the per capita income. In the US the equivalent would be perhaps US$20,000.

The second consideration is the fact that Sanu repaid the loan quickly — in about three months. He is a man of honour and integrity and I am proud to have such a man working in shop 2. He has earned my admiration and respect.

And, third, and something that is very near and dear to my own heart is that by working at shop 2 and doing a good job Sanu made enough money to repay the loan in three months. He was taking good care of his family and was still able to put aside 5,000 per month for loan payment. Boys, I have been there and I can tell you from personal experience that Sanu is making BIG money for a kami and God bless him.

–BILL MARTINO

Kumar Bishwakarma
[mark=six-pointed star AND/OR roman initials ‘K.B.’ AND/OR devanagari initials ‘Ku.Maa’]

H ere is Kumar Bishwakarma, maker of the Kumar Kobra. As you can see he is a young man but is coming on very strong and is producing some unique and very good khukuris. He does not have his wristwatch yet but one is on the way to him.

Of some interest is the fact that Kumar is wearing eye protection while using the grinder. The Himalayan Imports shop is one of a very, very few to offer eye protection goggles for its workers so they tell me. Also, notice the old bicycle chain driven grinder setting idle against the wall. Our backup system in case of prolonged power loss.

The young boy who is visiting the shop is the son of HI kami Kesar Bishwakarma who makes many of our standard items.
— Bill Martino 10/99

Sher Bahadur (‘Brave Tiger’) Bishwakarma
[mark=full sun (pre-2002) OR half sun (post-2002) AND/OR initials ‘S.B.’]
W hat a name. The surprise was this is Kumar’s older brother. Sher had been working in another shop for maybe 15 years but when Kumar told him about the pay and working conditions at BirGorkha Sher quit his old job and signed on with HI. If he does all his work as he does the kagas katnes we have another top quality journeyman kami. Kumar is one of our best and I figure his big brother has to be just as good or better due to his experience.

When I got our first kagas katnes I was impressed with just how well they were done. As you can see from the reviews of this little knife others have been equally impressed. I wondered which kami made these because I thought his work was exceptional. All those kagas katnes were made by Sher Bahadur Bishwakarma.

Sher is about 30 and has about 17 years experience. Here he is showing off one of his 18 inch Ang Kholas. Sher makes the biggest, beefiest, strongest khukuris of any kami in the shop. His younger brother, Kumar, likes to make long, slender blades — just the opposite. Both men are excellent kamis and excellent workers. When they come to BirGorkha they come to work, not to chat and drink tea. They are both good producers.

This picture was taken in the shipping room. In the background you see Pradeep, mama [='(maternal) uncle’], Bhimsen, and an apprentice preparing khukuris for shipping.

Like most kamis, Sher is the oldest son of a kami family. Home is down in the Dharan area. I’d guess he’s 25 or 30. Kumar who worked for us for some time is his younger brother. They are both good kamis and excellent producers, primarily because they know how to utilize apprentices quite well. Sher is a no nonsense type of guy but little brother Kumar was a jokester and cutup which got him in trouble on a regular basis. The two did not get along well.

As oldest son Sher will get all or at least the lion’s share of the family property so he leaves from time to time to work on the farm trying to keep it in the best shape he can.

–Bill Martino 12/99 & 10/2002

Prakash Bishwakarma[mark=small khukuri]
P rakash is the nephew of ‘Bura’ (the Royal Kami). He left BirGorkha in February 2000 and seems to have returned in May 2002. He may be back to make a few bucks to finance a new girlfriend or may be back for awhile. Who knows? As soom recall he was the Casanova of the kamis — three wives, lost track of kids, several serious girlfriends and many not so serious. Prakash was a good solid kami who did good work. His fit and finish sometimes left a little to be desired but he made a good stout khukuri that almost never failed. His problem was in dependability. He was too handsome for his own good. Some girl would make eyes at him and he wouldn’t show up for work for 3 or 4 days.�

–B.M.

Murali Dhar Bishwakarma
[mark=trisul(pre-2001?) OR stylised flag of Nepal [vertical] (2002 and later) AND/OR roman initials ‘M.R.’]


T his is Murali Dhar Bishwakarma with wife and two kids. They tell me he is about 40 with almost 30 years experience. His mark is the trisul and he seems good about marking the khukuris he makes. The work he has done so far is very solid and shows experience and care.

As some old timers may recall Murali was a good kami who worked at BirGorkha until he came down with TB and had to quit and return to his village. Well, he’s back thanks to Pala and the BirGorkha health care system.

Pala routinely sent money to Murali which allowed him to get treatment for the TB. Thanks to decent care, meds and Pala now Murali is up and running again and we’ll soon be seeing some of his good work again.

Durba Bishwakarma[mark=stylised flag of Nepal [horizontal](pre-2002)]
N o biographical information or photograph available.

Shankar Kumar Bishwakarma[mark=trisul AND/OR roman initials ‘K.S.’]
S hankar is the newest kami at BirGorkha. Just 20 years old, but already making excellent khukuris. [more bio info to follow]

I am Kami Sherpa. I have almost 70 years experience with khukuris. I have lived all my life in Nepal except for a few years when I lived mostly in India while I was serving as a Gorkha Rifleman in the Indian Army.

I served in the Indian Army, Assam Rifles, 4th Battalion, Company C from 1952 to 1957. I was a rifleman. I believe you call the rank a Lance Corporal here. I was assigned to mostly border duty with Pakistan and Bangladesh. I did some duty in the Kashmir.

I intended to make a career of Gorkha service but family hardship caused me to leave the service before I wanted. I am lucky in that I never had to kill anybody but I had to chase many along the border with my khukuri.

I have eight children living. My wife, Dali, died much too young with heart disease. I never remarried and raised the children by myself.

I have had a khukuri in my hand for almost 70 years. As children it was our responsibility to gather wood for our fires so you learn to use the khukuri at a very early age.

My neighbour, Kancha Kami, was the kami who made khukuris for all the people in our valley and even beyond. He was a very fine kami and I learned much about the manufacture of khukuris from him. He was older than me and has now left his body. He made some khukuris for us when we were first getting started as Himalayan Imports but sadly neither Bill Jwai nor I have one of these and now it is too late to ever get another.

My father-in-law, Kami Sherpa, is not a kami though he can make a very nice handle for a khukuri but lacks the skill to forge a decent blade.

He was named Kami for the following reason:– the Sherpas believe that the Angel of Death has a quota to satisfy and this includes newborns. It is believed the Angel will pass over those of lower caste so they named their son “Kami”, hoping the Angel would think he was indeed a kami of the lowest caste and not take him to fulfill the death quota.

BILL & YANGDU MARTINO

[‘Didi’ Yangdu Martino (widow of ‘Uncle’ Bill) is the owner and manager of Himalayan Imports khukuri sales and distribution and other operations based in Reno, Nevada, USA. Yangdu is the daughter of Kami Sherpa. Bill Martino graduated from college in 1956, with a degree in math and physics, and earned his pilot’s license in the same year. Took one year advanced study as “special student.” About 20 years experience mostly as a flight test engineer at such firms as Boeing, Lockheed, Cessna, Ryan and Rohr. Time out during college to volunteer for service in US Navy during Korean War. ]

BILL: About 20 years ago after having been a student of Oriental religion for some time I decided it was time for me to travel to the part of the world that could provide me with some teachings straight from the horse’s mouth, so to speak. I decided to go to Nepal.

But, I got to thinking. Here I am, an American, from the richest country in the world, going to Nepal, one of the poorest countries in the world, to try to get something from them. It did not seem fair so I joined the Peace Corps as a volunteer, and traveled to Nepal in that capacity. It took about two minutes off the plane at Tribhuvan to realize that what Nepal needed most was some employment opportunities and a few Yankee dollars.

A failing kidney cut short my tour of duty in the Peace Corps, but after surgery and recovery in the US, I returned to Nepal as a private citizen determined to accomplish my mission of learning more of Buddhism and finding some way to achieve my goal of returning something to Nepal in exchange for my lessons in Buddhism. I met Yangdu and we were married. I found the answers I was seeking and became a Buddhist. I searched for a way to help the Nepali people.

Finally, I decided to try one of the few things the Nepalis could manufacture — the khukuri. Himalayan Imports (which should have been Himalayan “exports”) was born. At first we tried to deal directly with individual kamis such as Nara but found this gave us no real product line and gave us problems like scabbards. Just because a man can make a decent knife does not mean he can make a decent scabbard. And, the handles were often only four inches, made for Nepalis. We kept working.

I started to run ads in knife magazines and other appropriate spots and found they were very expensive. I had to set the price of my khukuris high to try to cover ads and operating cost. I had the reputation of the junk kukri from India to overcome. I sent knives to magazines and newspapers here and abroad hoping for exposure. Just trying to stay alive was a major problem.

In Nepal, we were searching for a way to standardize our khukuri. We discovered a shop in southeast Nepal that was making khukuris for the tourist market, down and dirty cheap, but the operator was capable of making a high quality khukuri to our specs. So, we made a paca, a deal. We would try a joint venture, making a top quality khukuri with a decent sized handle aimed at the US and world market. We would make the best that could be made and pay the price — and this is what we have done.

The more we sold the more I advertised and promoted, keeping the price of the khukuris steady. I gained customers and soon many of my sales were repeat orders.� Our khukuris began to attract attention and a magazine article would pop up here and there. My legwork began to pay off and we started receiving orders from foreign countries — not many, but some. More articles and the word began to spread. We started to show a profit. We made more khukuris back in Nepal, giving employment to those that needed it most. And, after five years of struggle we were showing a profit.� I received offers from major manufacturing houses in India and Pakistan who could make a khukuri of equal quality for a lower cost. I turned them down, telling them this would be like taking the food off my own family’s table.

We made a khukuri for the Canadian Army Museum which was rated the best in their collection. About 25 of our khukuris were donated to the National Knife Museum in Chattanooga by Dr. Bill Rosenthal of New Orleans. More articles. About a year ago and at the cost of a bleeding ulcer I bought a computer and got on the net. In the last couple of years we have had good press.

This may not seem like much to the big boys but to date I have invested about $50,000 in advertising and promotion and have untold hours of time invested toward making this business work. I have bent over backwards to offer the best customer service that I can. In Nepal the kamis have sworn at me because I would ask for the “impossible.” It has not been easy but I am proud of our effort.

Although I have no way of proving this I am of the opinion that our years of struggle and effort have inspired US manufacturers to introduce khukuris as part of their product line and others to import khukuris and offer them.

–Bill Martino, 11-March-1999

Long ago and far away. �The photo above is from about 20 years ago [early 1980s] at the Buddhist temple of Boudanath just outside Kathmandu. A lot of memories. Going to the temples to do puja and then lunch or dinner was a standard “date” for Yangdu and me. There is something about the total silence with only the sound of the flags rippling in the wind that is quite magical.

The Tibetan goatskin jola I’m carrying (and always carried everywhere) was purchased from a Tibetan refugee who had a little pasal [shop] in Chetrapati. We became pals. He’d served in the Tibetan Army and fought the Chinese when they invaded Tibet and took a round through the neck which he proudly displayed. Good old guy. I used to stop and visit him when I was ratting the streets. He’d drink tea and I’d send out for a bottle or two of Iceberg beer and we’d sip our respective brews and solve the problems of the world. I can remember him like it was yesterday but I’ve forgotten his name. Details, details.

When Yangdu was a young girl and used to travel to India to visit relatives she would ride what is called the “night bus.” The male passengers would often try to become amorous with female passengers during the darkness of night so Yangdu would always tape a small 9 inch khukuri to the inside of her thigh. If she was approached she would reach under her anghi (long Sherpa dress) and whip out her little khukuri. Her stock phrase was, “if you want to keep that hand then keep it off me.”
–B. Martino


left to right — Yangdu, Rajkumari, Bandana, and Uncle Bill
Rajkumari is the wife of Vikash, Bandana is 7 year old daughter. 3 year old son, Denny, will not stand still long enough for picture.

This is typical Nepali kitchen for city dwellers. Vikash has home in Bagh Bazaar, the quarter where Yangdu and I had our first apartment in 1984. Propane range, no oven. Water is hand carried from outdoor faucet. (White water buckets). Water must be boiled and filtered. Notice filter on shelf just left of Yangdu.

GELBU SHERPA

G elbu is Kami Sherpa’s son and a shop manager at BirGorkha. In the photo, Gelbu and gal pal, Deena, are having a cup of tea. Deena is of the Newari caste. Both her father and mother are engineers.

Scabbard Makers or Sarkis [=leather-workers](may or may not be making scabbards for HI at present)
1) Ashok Sarki
2) Ragu Sarki
3) Gunthya Sarki


Top picture is the basic tool kit of the sarkis. Bottom is the BirGorkha heavy duty sewing machine. Seated at the machine is sarki Govinda

Sarki at work:

‘Here’s a pix of our village sarki, Prakash, at work. By the looks of it he can chuck quite a bit of wood.
The gal looking on is Pradeep’s wife, the very nice looking kamini, Rewoti.
Old timers will recall that Pradeep, assistant BirGorkha manager, eloped maybe year back with this gal in the middle of the night, disappeared for about a six month honeymoon (both kamis and kaminis are quite amorous), and then returned to “try” to get back to work.’
–B. Martino, 5th Feb 2002

Some Silverworkers:

‘Here are Rabi, right, and Bhani, left, doing the silver work for a kothimoda. You can see the partially completed scabbard on the little table. They are working in their BirGorkha apartment above the shop. As you can see the apartment in not the Waldorf Astoria but it is better than a lot of places I’ve stayed in Nepal.
On the small table and floor are the tools of the trade for silversmithing — torch, mini forge, hammer and some small dies and tools.
Of interest to the old and regular forumites is Rabi, the oldest son of Murali, the kami who had to give it up because of tuberculosis.
Bhani is his nephew. Pala routinely sends money to Murali for medical expenses — BirGorkha disability insurance.’

–B. Martino, 02-02-2002

Newari wood-worker (bottom) and his work(top):

This young man belongs to the Newari caste that does carving. It is in their genes and it shows. He does excellent work and is a frequent visitor to BirGorkha. His home is just a five minute walk so it is very easy for him to drop by, ask questions, and then resume his work. He is a very nice young man and I liked him a lot.
–BM 3/2000

Khukuri ‘Construction & Maintenance’at the Khukuri FAQ page

‘Bir Gorkha and Environs’ at the Khukuri FAQ page

For a lot more information, customer reviews of Himalayan Imports khukuris, and very interesting reading, visit the Himalayan Imports Forum by clicking here:

CHECK OUT OUT THE HIMALAYAN IMPORTS WEBSITE — CLICK HERE .

Himalayan Imports — Good place to buy khukuris, kukris, Gurkha knives, swords, knives, blades

All content on this WebSite is copyright 2010, Himalayan Imports

Some disreputable firms have copied pictures of Himalayan Imports’ products off our website, and have used them
in their own advertisements to pawn off lesser-quality khukuris on unsuspecting consumers!
Please inform us if you discover illicit use of our content.

We’re very grateful to our friends at Sensey Electronics, our new exclusive distributor in Mexico. Their representation of the Eminence brand at the Soundcheck Expo in Mexico City was truly top notch. We look forward to growing the Eminence brand in Mexico with the expert team at Sensey! Visit http://www.sensey.com.mx/ to learn more about this great company.

Eminence is proud to be a supplier of custom designed 10″, 12″ and 15″ speakers to High Performance Stereo for their HPS-4000® system. Following is news from HPS regarding being chosen to provide sound for the National Marine Museum’s new theater in Triangle, VA.

High Performance Stereo is pleased to announce that the Marine Corps Heritage Foundation in partnership with the National Museum of the Marine Corps in Triangle, VA, located near the Marine Corps Base Quantico, has selected the HPS-4000® sound system for the new large screen theatre currently under construction. The theatre will boast an 80 foot wide screen that is also 60 feet tall and will be the home of a special new large format film now in production.

Building a sound image big enough for a screen of this size has always presented a challenge for sound systems. In the past most systems have attempted to create tall sound images with a single center speaker high above the main center speaker. While this approach does help, it still fails fill the screen with a wall of sound that stereo is supposed to be.

Eminence is pleased to announce the company has become ISO 14001 certified. An ISO 14001 environmental management system is a systematic and process driven approach to controlling those aspects of a business that have a significant impact on the environment.
More »

Who’s ready for Winter NAMM 2016? It’s going to be another great show, and we have some very talented artists hanging out with us this year. If you’ll be attending the show, be sure to stop by and say hello and hear the tone clinics these guys will be putting on.
More »

In 1966 Bob Gault founded what was to become the world’s largest loudspeaker manufacturing company after working as an engineer for Magnavox and CTS (Chicago Telephone Supply). Gault started Eminence building only three 18” speakers per day, based on a commitment from Ampeg’s Everett Hull. Under the leadership of Gault and most recently his son, Rob, the company’s capacity grew to over 10,000 speakers per day, employing nearly 200 people.
More »

Eminence has teamed up with Nashville session artist and Rascal Flatts sideman Travis Toy to create a 300 watt, ultra-lightweight signature pedal steel guitar speaker.
More »

Related Posts:

donde comprar viagra femenino en medellin
purchase viagra from pfizer
menor preço viagra
rezept viagra online
can u buy viagra in uk
viagra online us pharmacy
ho comprato viagra
online pharmacy for generic viagra
where to buy viagra over the counter
buy viagra with paypal